Cardin RVQ504C1, Manual

Page: 11 / 60

11
Memory module ZGB24LC64-I/P
The module is furnished with a none-volatile EEPROM type memory and contains the transmitter codes and allows
you to memorise up to 1000 codes. The programmed codes remain stored even in the absence of power.
Attention! Removing and inserting the memory module must be carried out when the receiver is switched off
otherwise the memory content could become corrupt.
PREPARING THE SYSTEM
To obtain the best results from the radio control system the aerial installation site should be carefully chosen. ‘Range’
is intended to mean the working distance, measured in free space, between the receiver and the transmitter with
the aerial installed. The range is therefore closely linked to the technical characteristics of the system and varies
according to the characteristics of the site in which the system is located. For best
performance we advise you
to use the Cardin ANS400 / ANQ800-1 aerial. Wire the aerial to the receiver using a coaxial cable RG58
(impedance
50Ω
) with a maximum length of
15 m
.
433 MHz transmitters 868 MHz transmitters Description
TXQ504C2 TXQ508C2 2-channel precoded transmitters
TXQ504C4 TXQ508C4 4-channel precoded transmitters
TXQ504C8 TXQ508C8
8-channel precoded transmitters
TXQ504BD2 TXQ508BD2
2-channel precoded transceivers
TXQ504BD4 TXQ508BD4 4-channel precoded transceivers
TXQPRO504-4 TXQPRO508-4 4-channel precoded industrial transmitters
TXQPRO504-4A TXQPRO508-4A 4-channel precoded industrial transm aerial
433 MHz receivers 868 MHz receivers Description
RVQ504C1 RVQ508C1 1-channel receiver - 230V
RVQ508C4 RVQ508C4
4-channel outdoor receivers - 230V