Powerheart® AED G3 Plus 9390A and 9390E
70-00915-01 F
2-9
Pad installation
To install the pads:
1.
Open the lid of the AED.
2.
Place the pad package into the lid so that the expiration label is
visible through the clear window on the lid. The expiration date of
the pads will then be readable without opening the lid of the AED.
3.
Match the color of the connectors (red to red), then plug the pad
connector into the AED case as shown in the photograph.
Once the pad connector is plugged into AED, the PAD indicator
should extinguish.
4.
Tuck the excess cable length in the bottom holder. With the pad
package completely secured to the AED lid, close the lid.
5.
Make sure the expiration date is visible through the clear window
of the lid and check to make sure that the STATUS INDICATOR
is GREEN. If the pads are not installed properly, the STATUS
INDICATOR will be RED. Contact Cardiac Science Technical
Support (see
Contact information
on page 1-2) or outside the U.S.,
your local Cardiac Science representative.
White
Red
Defibrillation pads
Summary of Contents for POWERHEART G3 PLUS 9390A AED
Page 1: ...QUICK REFERENCE GUIDE POWERHEART AED G3 PLUS 9390A AND 9390E 70 00915 01 F...
Page 29: ......
Page 30: ......
Page 31: ......
