70-01047-01 B
Product Safety and Setup
20
Connect to power
The input power cable includes a 3-conductor, medical-grade
power cable.
To connect the ECG device to power:
1.
Connect the external power supply (brick cable 010-1684-
00) to the external power connector (see 7, in
) on
the back of the ECG device.
2.
Connect the AC power cable (007082 or 047262) to the
external power supply (brick cable).
3.
Connect the AC power cable to a properly grounded,
medical grade wall outlet.
Low
Indicates the ECG device is running on
battery power and less than 15 minutes
of operating time remain. The ECG
device also beeps every 30 seconds as
an audible low battery warning.
When
Low
displays,
immediately connect the ECG
device to AC power to
recharge the battery and
prevent operation
interruption.
Power
down
Indicates the battery no longer has
enough power to maintain normal
operation and shuts off approximately
5 seconds after the message is
displayed.
Connect the ECG device to AC
power to resume operation.
Display Description
Action
