Installation Note
Part number 3E1100 R16
1
July 2010
CAUTION
This equipment contains components that can be damaged by
electrostatic discharge. Ensure both you and the equipment are
earthed before beginning any servicing.
Before you Begin
Unpack the Prox Mifare Series (Teardrop) reader and check the shipment
contains the following items:
•
1 x Prox Mifare Series (Teardrop) reader base
•
1 x Prox Mifare Series (Teardrop) reader facia
•
1 x printed circuit board (PCB) assembly
•
1 x cable assembly
•
1 x M3 Torx Post Security screw
•
4 x self tapper pozi counter sunk fixing screws (two different lengths)
WARNING:
You must use the screws provided, as using other types of
screws could interfere with the electronics. (See the “Mounting” section
later for further explanation.)
Firmware
Version vMT3.07 (or later) of the Prox Mifare Series (Teardrop) reader
firmware code supports the Mifare Enhanced Security feature. This feature
provides a method of ensuring that readers reading Mifare cards are able to
prevent access through the use of replicated cards, and is optional for
customers, (i.e. customers can choose whether to use this enhanced security
and which doors to apply it to).
The Mifare Enhanced Security feature is only supported when the reader is
connected to a Cardax FT Controller 3000 or a Cardax FT GBUS Universal
Reader Interface.
Prox Mifare Series (Teardrop)
