Page 10
O
PERATOR
P
ROGRAMMING
- B
ASIC SETTINGS
When the door operator is turned on (plug in power cord) it runs a self-test;
all 4 LEDs will glow and operator 230V light will illuminate for approximately 2 seconds.
When the light is off and LED
I
is illuminated the operator is in normal operating mode.
A
DJUSTMENT
B
UTTONS
:
All settings and adjustments can be made with the three adjustment buttons.
Press and hold
%
for approximately 2 seconds to change from operating to programming mode.
When all LEDs are illuminated and LED
S
starts to blink, release
%
.
You are now in the programming mode for basic operator menu settings.
Use
&
and
/
to change settings of chosen program menu
%
to store menu setting and go to next menu.
M
ENU
O
VERVIEW
:
a
Set door OPEN position
b
Set door CLOSED position
c
Program hand transmitter
T
O
S
ET
U
P
T
HE
O
PERATOR
:
Menu
a
S
ET DOOR OPEN POSITION
2
1.
Press
%
for 2 seconds until LED
S
blinks and all others are illuminated.
2.
To move the garage door to desired fully
OPEN
position press & hold the
&
until desired
DOOR OPEN
position is reached.
For fine-tuning use the
&
(
OPEN
) and
/
(
CLOSE
) buttons.
3.
Press
%
to store settings and to go to Menu
b
.
Menu
b
S
ET DOOR CLOSE POSITION
4
1.
LED
F
blinks and all others are illuminated.
2.
To move the garage door to desired fully CLOSED position press & hold the
/
until desired
DOOR CLOSE
position is reached. For fine-tuning use the
/
(
CLOSE
) and
&
(
OPEN
) buttons.
3.
Once door position is correct press
%
to store and go to Menu
c
.
