16
If your transmitters have been programmed to a second Carbine security system, follow the steps
below.
For LCD Remote Control Transmitter:
Second Vehicle Operation: While the icon is displayed on the LCD screen, you
can remote control and communicate with a second vehicle security system.
1. Press and hold and buttons at the same time until one long beep is heard.
Programming Mode has now been entered.
Note: No action for five seconds will generate two long beeps indicating the
Programming Mode has been exited.
2. Within 5 seconds, press and hold the button until two beeping sounds are
heard and the icon is displayed on the LCD screen indicating second car operation.
3. While the is displayed, press any button on the transmitter to control the second vehicle’s
security system or alarm function (arm/disarm/trunk/remote start).
Note: Button functions are the same for the second car as they are for the first car.
Return to First Car Operation
1. Press and hold and buttons at the same time until one long beep is heard.
Programming Mode has now been entered.
Note: No action for five seconds will generate two long beeps indicating the
Programming Mode has been exited.
2. Within 5 seconds, press and hold the button until one beeping sounds are
heard and the icon is not displayed on the LCD screen indicating first car
operation.
Second Carbine Security System Operation
PLUS-6800-UM 4/27/06 14:44 Page 16
