T h e N e x t G e n e r a t i o n i n L o c k i n g
3. INSTALLATION OF THE MORTICE LOCK (METAL HOLLOW STYLE DOOR)
3A
Prepare door by cutting openings for
fitment of cover plate and oval cylinder.
Please note: if installing together with:
●
CFB-CSL - Flip Bolt Mortice Lock - Concealed Short lever
please refer to instructions provided with CFB-CSL.
3B
Insert lock into door cavity.
Ensure bolt is extended.
3C
Secure with
2x M4x16mm CSK Screws.
3D
Measure and cut slot in door jamb.
*If retrofitting, ignore this step.
3E
Insert oval key cylinder and secure
with retainer pin.
Test functionality of lock before fitting
cover plate.
*If required, fit bolt packers.
7.5
72
14
3F
Insert cover plate into lock
and secure with
2x M4x6mm CSK Screws.
3G
Complete installation with
CFB-OCEP
Carbine Oval Cylinder
Rectangular Escutcheon.
For installation requiring a
saver plate (sold seperately),
please refer to section 4.
167
156
25.4
5.5
39
14
19
Drill 2 x Ø4 holes
and Countersunk
Ø6 x 90°
DOOR EDGE
EXTRUSION
THICKNESS
20 + DOOR EDGE
EXTRUSION
THICKNESS
R3
For hinged door
For sliding door
For sliding doors use
Carbine CLS-FAB flip bolt latching strike,
for installation instructions refer to
instructions supplied with CLS-FAB
●
CFB-EH - Flip Bolt Mortice Lock - Egress please refer to
instructions provided with CFB-EH.
CFB-HB
- Installation Instructions Revision 2 - 14th March 2019
