T h e N e x t G e n e r a t i o n i n L o c k i n g
Distributed in Australia by
LOCK AND KEY a division on the
DAVCOR GROUP PTY LTD ABN 95 003 562 598
This product has been manufactured in China
to Lock and Key Company specifications
This product is guaranteed to be free from defects in materials and
workmanship for a period of one (1) year from the date of original
purchase. This warranty is for replacement of product only and Lock
and Key Company does not accept responsibility for any direct or
consequential damage caused by this product or its use. This warranty
does not cover damage
that results from faulty installation or usage,
alteration or modification of the product or tarnishing of the finish
including colour change due to weather, salt or chemical. Should this
product not perform satisfactorily in its intended application, return it
to place of purchase for replacement.
LOCK & KEY
Phone:
1300 652 692
Web:
www.locknkey.com.au
Web:
www. daveweb.com.au
NOTE
Please dispose of plastic
bags and other packaging
in a thoughtful manner
WARNING
Please keep contents
away from small children.
Suffocation Hazard.
Special Notes:
For lock installation instructions, please refer to installation instructions provided with CFB-D / CFB-HB.
For installation together with CLS-FAB - Flip Bolt Latching Strike, please refer to the installation instructions provided with CLS-FAB.
For installation together with CFB-OCEP - Oval Cylinder Rectangular Escutcheon, please refer to the installation instructions provided with CFB-OCEP.
5I
Installation is now complete.
5H
Insert oval key cylinder
and retainer pin if required.*
Attach cover plate to lock and
secure with 2x M4x6mm CSK
Screws (supplied with lock).
Insert oval key
cylinder and
retainer pin
if required.
*With rabbit ear / R cam fitted on
the oval cylinder.
5E
Insert top mounting
screw pin through the
top mounting plate hole
on the faceplate and into
lock. Fasten to retain, do
not tighten.
5F
Insert bottom mounting
screw through the bottom
mounting plate hole on the
faceplate and into lock.
Fasten to retain, do not
tighten.
5D
Ensure handle is in the
up position, spring at the
top and the lock bolt is
extended.
Position the faceplate to the
door and insert the spindle
into the lock drive.
C F B - E H F L I P B O L T M O R T I C E L O C K - E G R E S S H A N D L E
5G
Align furniture to be even
and parallel with door edge.
Securely tighten both mounting
screws.
Test handle operation.
This way up
Upright Position
5A
Insert mounting plate with bosses
facing handle side into door cavity*,
do not drop inside door.
Firmly press mounting plate clip through
the door extrusion into the mounting plate.
5C
Secure with 2x M4x16mm CSK
Screws (supplied with lock).
*with the boss
through drilled holes
5B
Insert CFB-D / CFB-HB
lock into door cavity.
ENSURE BOLT IS EXTENDED.
5. INSTALLATION OF MAIN LOCK AND EGRESS HANDLE
