15
separate here with
dime or small flat blade
screwdriver
Replacing the Remote Controller Battery
The CARBINE remote controllers are powered by a CR2032 Lithium
battery. When the battery begins to weaken, the operating range of
the remote control is reduced and the LED indicator on the remote
will begin to dim.
To replace the battery, follow the enclosed procedure.
1. There is a slot built into the remote case. Use a dime or small
flat blade screwdriver to separate the top and bottom cases of
the transmitter.
2. Use a pencil to remove the battery from it’s holder.
3. Insert the new battery with the (+) pole of the battery facing up.
4. Re-assemble the top and bottom cases and snap them
back together.
5. Press the buttons to make sure the LED indicator flashes.
Summary of Contents for 46CR
Page 1: ...1 O W N E R S M A N U A L...
