Carbest 800801, Operating And Users Manual

Page: 16 / 60

16
NOT_CARBEST-00 NOT_CARBEST-00
UK
12V 20A
input
Voltage 230V +/- 15% - 115V on request
Frequency 50Hz - 60Hz (+/- 10%)
Cos phi 0.6 typ
Efficiency 80% typ
Consumption 3A
Fuse T4A 250V 5x20mm
Output
Nb of output
1 output
Nb charginig curves 5 possible charging curves.
Selection by external dip-switch
Curves types IUUo & automatic weekly equalization
Charging
profiles
Voltage Allowance +/- 2%
Ripple < 1% pp (BW < 20 MHz)
Current 20A
Fuse F25A 32V
Automotive
Protections
Against output overload, output short circuit,
excessive internal temperature, excessive
battery temperature, output overvoltage,
battery reverse polarity (fuse)
general
Display Tricoloured LED
Operating temp -10°C to +50°C / +14°F to +122°F
Storage temp -20°C to +70°C / -4°F to +158°F
Humidity 10% to 90% (without condensation)
Ventilation Thermostated fan cooling
12V 20A
LED Mode Status
Yellow Absorption The battery is charging. Time required
to complete absorption mode var-
ies, depending on the initial sate of
charge of the battery. It is limited to
6 hours
Flashing
yellow Equalization The battery is coming to the end of
the charging cycle. Time required to
complete equalization mode var-
ies, depending on the initial sate of
charge of the battery. It varies from
30 minutes to 4 hours
Flashing
green End
equalization The battery is almost charged. Float-
ing mode will begin in less than 30
minutes
Green Floating The battery is completely charged
Red Internal
temperature
fault
Battery
temperature
fault
The charger is on standby mode for
a period of between 30 seconds to
10 minutes. Once the fault has been
solved, the charger restart automati-
cally
> Please check the ambient tem-
perature (charger and/or battery) as
well as the internal fan and the place
around the charger
Flashing
red Output
voltage fault The charger is on standby mode for a
period of 30 seconds. Once the fault
has been solved, the charger restart
automatically
> The electronic board has probably
failed and the damage is irreversible
Flashing
red (quick
flash) Output fuse
The output fuse should be replaced
> Please check the battery’s polarity
Flashing
green
(quick
flash) Stand-by
The charger is not charging (no main
or stand-by mode)
Battery Selector Boost - float
Open lead 14,2V – 13,2V
AGM 14,9V – 13,8V
Gel 14,3V – 13,8V
Lithium normal 14,6V – 13,8V
Lthium high 15,0V – 14,2V
TECHniCAl SpECifiCATiOnS OpERATing inSTRuCTiOnS
EMC EN61000-6-3 & EN61000-6-1
Security EN60335-2-29 (2002)
Housing Aluminium type – wall mounted
Mounting 2 x 4mm screws
Dimensions (mm) 278 x 120 x 96
Weight 1.3 kg / 2.87lbs
Ac interface 3 x 1,5 mm
2
cable, lenght 1m
Battery interface AWG12 cables, lenght 1m
T° sensor & carbus
interface 3 points terminal
Pin_out auxiliary
connector:
1 - carbus
2 - com
3 - t° sensor
GB