13
NOT_CARBEST-00
NOT_CARBEST-00
UK
WARning
CE COnfORmiTy
This product conforms to current European
standards and has a CE mark. Please consult us for
the certificate of conformity.
paragraph on EMC – Technical Specifications.)
4
When in use, avoid submitting the device to levels
of interference, in particular electromagnetic and
conducted, superior to those legally permitted
(for example, the devise installed too close to an
emitter) as this may cause irreversible damage.
4
This device emits interference (electromagnetic
and conducted) which complies with legal
standards. Ensure that materials used are
compatible i.e. susceptible, with this device in
order to avoid irreversible damage.
Series number.
This reference is found on a grey sticker on the
side of the charger. It is made up of: 2 digits
indicating the manufacturing year; 15 for 2015, a
letter representing the month; C for March, and
a 4 or 5 digit number indicating the production
number.
Rev XX refers to the number of modifications /
evolution of the product since its initial launch.
nB: Choosing the charging curve.
It is extremely important to choose the correct
charging curve, one which is appropriate for the
battery’s technology. An incorrect choice could
cause irreversible damage.
4
This is particularly true for charging curves
where the charging voltage is higher than the
manufacturers’ recommended voltage levels.
4
There is a high risk of overheating and emission
of noxious gases
4
Charging curve for Lithium are compatible with
batteries that have a BMS (battery management
system) installed.
4
It is essential to consult the battery manufacturer’s
recommendations.
maintenance precautions.
4
This device cannot be dismantled and thus the
PC board is inaccessible. It is strictly forbidden
to dismantle the housing for any reason. Electric
shock possible.
4
In order to prevent risk of electric shocks
during maintenance, please follow closely
all recommendations below before any
maintenance begins.
4
Any operation carried out to this effect must be
carried out by an authorized electrician.
In the event of damaged wires or cables, these
must be replaced by an authorized electrician.
The end user must not attempt to change them.
4
The mains and battery connections must be
disconnected before any work is carried out in
order to avoid transfer of energy
4
Fuses must be replaced by fuses that have the
same characteristics and performance levels.
GB
Summary of Contents for 800801
Page 2: ...2 ...
Page 60: ...60 www reimo com ...
