7
LED-DISPLAY:
OPERATION WITH 12V / 24V
- Connect the “DC cable supplied with the appliance to a suitable DC socket outlet.
A 120 watt dc socket outlet is recommended. The appliance will automatically identify and apply 12V or 24V.
- In the Temperature window the digital temperature last set will flash for 5 seconds and then automatically change
to display the temperature inside the cabinet.
- Press the “Up” or “Down” keystrokes to set the temperature you required.
- Press the Turbo button to increase the speed of the compressor.
This setting can be used when you need to cool product quicker.
- The set temperature will flash for 5 seconds and then automatically change to display the temperature inside the cabinet.
- To turn off the appliance, remove the DC plug from the DC socket.
OPERATION WITH 230V / 50HZ
1. Connect the appliance to a AC230V power source using the removable AC cable supplied with the appliance.
2. The LED light “230V” will illuminate to indicate the appliance is working.
3. In the Temperature window the temperature last set will flash for 5 seconds
and then automatically change to display the temperature inside the cabinet.
4. Press the “Up” or “Down” keys to set the temperature you require.
5. The set temperature will flash for 5 seconds and then automatically change
to display the temperature inside the cabinet.
6. To turn off the appliance, remove the plug from socket.
MAINTENANCE AND REGULAR CLEANING
- Always disconnect the power supply before cleaning. Clean the inside of the cabinet whenever necessary
using a warm solution of water and bicarbonate of soda(1 tablespoon to every 2 liters of water) dry with a soft cloth
- Dirt from the condenser should be cleaned by a qualified technician when necessary.
NOT A MALFUNCTION
- It is normal to hear gurgling sounds caused by the flow of refrigerant when each cooling cycle ends.
- The surface temperature of the compressor can reach 70-90 when running.
- The noise emitted by the cooling fan on the condenser is a normal condition.
ENGLISH