CARBATEC.C OM.AU
3
BS-345C
WHAT’S IN THE BOX
WELCOME
A.
Fence
B.
Front fence rail
C.
Rear fence rail
D.
Fence Hardware
E.
Machine to stand bolts
F.
Stand assembly bolts
G.
Door Lock Keys
H.
Mitre Gauge
I.
Table Tilt Lock Knobs
J.
Guard Height & Blade
Tension Knobs
K.
90˚ Table Stop Bolt
L.
Cast table
M.
Stand Cross Braces
N.
Stand Left/Right Legs
O.
Fence Rule
P.
Manual (not shown)
Q.
Main Machine (not shown)
BS-345C 14" BANDSAW
1.
Remove parts from all of the cartons
and lay them on a clean work surface.
2.
Remove any protective materials and
coatings from all of the parts and the
bandsaw. The protective coatings can
be removed by spraying WD-40 on
them and wiping it off with a soft cloth.
This may need to be redone several
times before all of the protective
coatings are removed completely.
3.
Compare the items to verify that all are
accounted for before discarding the
shipping box.
DO NOT
USE ACETONE, gasoline or lacquer
thinner to remove any protective coatings.
!
If any parts are missing, do not attempt to plug in
the power cord and turn “ON” the bandsaw. The
bandsaw can only be turned “ON” after all the
parts have been obtained and installed correctly.
!
This bandsaw will require a minimal amount of assembly.
A
B
C
D
E
H
I
J
L
F
K
M
N
O
G
