FOR TECHNICAL SUPPORT CALL
1800 658 111
16
BS-345C
C.
INSTALLING THE TABLE
1.
First, remove the table insert and pin.
The insert can be pressed or tapped
out carefully from below, while the pin is
tapered and may require a spanner or
vise grips to loosen and slide out.
2.
Lift the table and align the pre-installed
blade to the table slot. Slide the blade
through the slot, then rotate the table
90° clockwise, so the slot now faces the
outside right of the machine from the
front. Lower the table into place, taking
care to align the trunnion bolts below the
table, into the corresponding slots on
the trunnions. Fig. C1 and C2
3.
Screw the two lock knobs onto the bolts
through the trunnion brackets to secure
the table, but leave a little loose. Fig. C3
Congratulations - you now only have the
rip fence left to install, but we’ll do that
after we set the table up.
Fig. C
ASSEMBLY
Fig. C1
Fig. C2
Fig. C3
