Use & Maintenance Instructions Stump Grinder MTC Series
4. CORRECT USE OF THE MACHINE
This machine must be run by an operator only.
In order to use the machine correctly, the operator must first read and
understand the instructions in this handbook. Stop the machine
immediately if anyone enters the danger area.
The Caravaggi stump grinder series MTC is designed and built to shred
stumps and roots of felled trees in gardens, parks, channel banks and other
places, helping to restore the landscape.
It is not suitable for uses other than those listed above.
The operator must be thoroughly acquainted with all the instructions
provided in this instruction manual.
5. UNPACKING AND PREPARATION
The stump grinder series MTC can be arranged on pallets to facilitate
handling and transport before installation.
To transport the machine in these conditions it is indispensable to use a
transpallet or the like with an overall load capacity of around 100 kilos.
Do not:
•
lift the stump grinder using ropes or other unsuitable means;
•
drag the stump grinder
•
subject the machine knocks or impact;
•
expose the machine to rain, frost or other bad weather conditions.
On taking delivery, check that the contents correspond to the delivery note.
If you find any damage or deformity due to transport, report this to the
carrier immediately and inform the authorized dealer or the manufacturer.
In particular, check the machine for:
•
dents, bumps or deformation;
•
damp areas or signs indicating that the pack has been exposed to foul
weather;
•
signs of tampering.
After checking that the transport has been carried out correctly, prepare the
machine as follows:
•
cut the packaging strips and free the machine from the pallet;
•
remove the cardboard and move the stump grinder from the pallet, using
hoists and taking care not to damage the grinding unit;
- -
8
