Version 03.06.2015
V5-NTG45-PNP
P
age
11
3.2.2.
After-market rear-view camera
3.2.2.1.
Connection to the after-market rear-view camera
Connect the video RCA of the after-market rear-view camera to the female RCA
connector “REAR CAM” of the interface box V5C-M613.
-
The green wire of harness V5C-UNI01 can be used
for +12V electric power supply (max. 1A) of the
after-market rear-view camera. Configure in the
OSD-menu “MISC”, menu item “POWER OUT 2” the
designated electric power supply (see chapter
“Configurable switching outputs”).
-
-
On some vehicles the reverse light signal doesn’t exist on the CAN-bus. Connect the
white wire of harness V5C-UNI01 to reverse light signal (+12V of reverse light) if the
system doesn’t switch to the rear-view camera automatically after the described
OSD-setup (see next chapter).
1
2
3
+12V reverse gear analogue (exception)
V5C-MBN45
harness
3
2
1
Interface-box
V5C-M613
FRONT
V5C-UNI01
harness
Rear-view
camera
Power Out 2 (max. 1A)
