Version 03.06.2015
V5-NTG45-PNP
P
age
10
3.2.1.2.
Settings for connecting an after-market front camera
You have to configure some settings in the OSD-menus INPUTS and MISC if you want to
connect an after-market front camera (Operation of the OSD: see chapter “OSD-Operation”).
OSD-menu
Menu item
Setting
Explication
INPUTS
REAR CAM
OFF
No rear view-camera
ON
Rear view-camera connected
OEM
Factory rear view-camera connected
FRONT CAM
ON
Switches to front camera if parking
process is enabled and reverse gear is
released
MISC
REVERSE LOGIC
C:RGEAR
Enabled while parking process
C:RGEAR+TIME
Enabled with +12V on white wire and up
to 20 second
C:RGEAR+SPEED
Enabled while parking process and up to
20 km/h
A:RGEAR
Enabled with +12V on white wire
A:RGEAR+TIME
Enabled with +12V on white wire and up
to 20 second
A:RGEAR+SPEED
Enabled with +12V on white wire and up
to 20 km/h
Note:
RGEAR+SPEED / RGEAR+TIME setting: After deactivation you can’t enable the parking
process again until the vehicle is driving faster than 20km/h / less than 20 seconds has
passed or the ignition is switched off and on.
