Version 24.02.2012
USB-RNSE
Pa
ge
7
3.2.
Connections to head-unit
Remove the head-unit from the dash-board.
Transfer female Quadlock connector from the back of the head-unit to male
Quadlock connector of harness C3C-RNSE.
Plug female Quadlock connector of C3C-RNSE into male Quadlock socket of
head-unit.
Plug female 32pin AMP-connector of C3C-RNSE into male 32pin AMP-socket of head-
unit.
Note:
If the 32pin AMP-socket of the head-unit is already occupied, the vehicle probably has
a factory rear-view camera or a factory TV-tuner. In case of a factory tuner, it must be
uninstalled: disconnect the female 32pin AMP-connector of the factory harness and
disconnect all wires from the factory TV-tuner. In case of a factory rear-view camera you
have ordered/received the wrong product, call for support.