Version 24.02.2012
USB-RNSE
Pa
ge
11
3.4.4.
After-market rear-seat-entertainment
Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector
VIDEO OUT of USB-box USBC-M500.
Note:
As the output is a full output, not shared with the video signal for the
navigation system, splitting the video with an RCA Y-cable might give a good enough
picture for two rear-seat-entertainment monitors. If not, or if connecting more than
two monitors, use a video splitter.
4.
Operation
4.1.
Activation of the video-in-motion function
The video-in-motion function is activated by long-pressing the “next track” button when in
TV-mode. As confirmation, the head-unit’s button illumination will blink a few times slowly.
Repeat to deactivate, confirmation are a few fast blinks. While the video-in-motion function
is active, the navigation will not work. After ACC is switched off, the video-in-motion
function will be automatically deactivated.
4.2.
Selecting the usbLOGiC as current AV-source
Push the
CD/TV
button of the head-unit to choose
the usbLOGiC as current AV-source.
4.3.
Switching between internal USB and AV-input
After selecting the usbLOGiC as current AV source,
long-press the
knob
to switch between internal USB (AV1)
and AV-IN (AV2).
Note:
If the AV-input is deactivated (see chapter “Deactivating usbLOGiC AV-input”),
it is not possible to switch to the usbLOGiC’s AV-input AV-IN (AV2).