Version 31.01.2013
USB-E65-TV
Pa
ge
12
3.
Operation
3.1.
Activation of the video-in-motion function
Tthe video-in-motion function is permanently active without disturbing the navigation
performance.
3.2.
Selecting the usbLOGiC as current AV-source
In the vehicle’s main menu, select
Infotainment
and then
TV
by iDrive to choose the
usbLOGiC as current AV-source.
3.3.
Assigning device control for connected AV-source
After selecting the usbLOGiC as current AV
source, push iDrive knob to open the
usbLOGiC control menu. Select control
levels setup “AV: RCxx” and assign related
IR-code as described in device control
table.
Note:
If the AV-input is deactivated (see chapter “Deactivating usbLOGiC AV-input”), the
menu items “AV” and “AV: RCxx” will not be available.
3.4.
Switching to internal USB, AV-source or after-market rear-view camera
In the usbLOGiC control menu, choose TV to enter internal USB mode, AV to enter AV-input
mode (not available if AV-input is deactivated, see chapter “Deactivating usbLOGiC AV-
input”) or REAR CAM to switch to the usbLOGiC after-market rear-view camera-input (even if
the automatic switching to the camera input is disabled, see chapter “Automatic switching
to rear-view camera”). After selection the menu will close automatically and switch to the
selected source. The iDrive knob, some multi-function-steering wheel buttons (MFSW) and
some navigation buttons (HU) are now available for remote functions (see assignment table
for iDrive below).
By pressing the iDrive-MENU-button, the system returns to the factory iDrive functions. By
pressing the iDrive knob again, the usbLOGiC control menu will be re-entered.
