Version 27.08.2021
HW: CAM(V100)/(V20)
RL4-MIB100
P
a
g
e
8
1.5.
Settings of the 4 Dip switches (CAN functions – red)
The 4 dip-switches of the video are used to select the head unit and the
vehicle.
Dip position down is ON and position up is OFF.
Set all dip switches to off
Vehicle/Navigation
Dip 1
Dip 2
Dip 3
Dip 4
All vehicles
OFF
OFF
OFF
OFF
After each Dip-switch-change a power-reset of the video interface has to be performed!
1.6.
Settings of the 2 Dip switches (selection head unit - black)
Attention: Dip position up is ON and position down is OFF
(vice versa to the black 8 dips and the red 2 dips).
The 2 dip-switches on the upper side of the interface box are used to select the head unit.
If no image is displayed, switch
both
dip-switches
PARALLEL
to the oposite position.
According to the diagram below, a diagonal dip-switch position has to be avoided under any
circumstances!
Manufacturer head unit
Dip 1
Dip 2
Setting 1
OFF ↓
OFF ↓
Setting 2
ON ↑
ON ↑
After each Dip-switch-change a power-reset of the video interface has to be performed!
