Version 28.05.2015
RL-LR12-TF
Pa
ge
6
3.1.
Interconnecting CAN-Box, harness and factory navigation monitor
Connect female 8pin Molex connector of harness TV-LR02 to male 8pin Molex
connector of CAN-box TV-400/500.
Transfer female 16pin connector of vehicle harness from rear of the factory
navigation monitor into male 16pin connector of harness TV-LR02.
Plug female 16pin connector of harness TV-LR02 into male 16pin connector on the
rear of the factory navigation system.
3.2.
Connections to rear-view camera
Connect female Fakra-connector of adapter CAB-TV-AS20 to the male purple Fakra-
connector on the rear of the factory navigation monitor.
Connect the video RCA of the rear-view camera to the female RCA connector of
adapter CAB-TV-AS20.
Note:
Only compatible with NTSC-cameras.
www.eldibg.com
car audio & multimedia system
