Version 12.07.2019
OBD-BM-X-01
Check compatibility of vehicle and accessories
Installation
1.
Locate OBD-port and remove cover
2.
Turn on ACC
3.
Wait until the navigation has booted
4.
Plug coder into OBD-port
5.
The navigation will re-boot
6.
When the navigation’s startup-screen shows, remove coder from OBD-port
To remove the audio-AUX option from the navigation’s menu repeat steps 1.-6.
After the first use on a vehicle, the coder OBD-BM-X-01 is personalized to this vehicle. On
this vehicle the enabling and removing the audio-AUX option can be repeated without limit.
The AUX-cable must be connected into the vehicles
harness’ female Quadlock connector on the rear-side
of the navigation computer.
Quadlock connector, chamber B (black 12pin)
Pin 2
●
Audio NF + left
Pin 7
●
Audio NF + right
Pin 8
●
Audio NF ground
Requirements
Vehicle
1series (E81/82/87/88), 3series (E90/91/92/93), 5series (E60/61),
6series (E63/64), X5 (E70), X6 (E71), Z4 (E89)
Navigation
Navigation system
Professional
with 8.8” monitor
Navigation system
Business
with 6.5”monitor
