5
Maintenance
Always check the blade before use for cracks or signs of
damage.
Ensure that the reservoir is filled up to the recommended
level. Do not overfill or allow it to run dry.
Always clean the machine after use, after first ensuring
that it is disconnected from the mains.
Rinse out reservoir thoroughly to remove all sludge and
wipe down outside of machine using a cloth or sponge.
When not in use, store the electrical cable and plug under
the machine in the space provided.
No other servicing is required in normal use. No attempt
should be made to repair or replace internal components
as this may invalidate any claim whilst the product is under
guarantee.
Consumer Advice
Do not dispose of electrical products with your normal
household waste.
Always use recycling facilities whenever possible.
Additional recycling information can be found through your
local Authority or Retailer.
Warranty
This electric tile cutter has been manufactured to a high quality
standard. It is guaranteed against faulty materials and
workmanship for 12 months from the date of purchase. Any
claim must be accompanied by a valid till receipt as proof of
purchase.
A faulty machine will either be repaired or replaced free of
charge. If a direct replacement is not available, an alternative
to the same or greater value/specification will be offered.
This guarantee does not cover machine defects caused by or
resulting from:
a) Misuse, abuse or neglect,
b) Trade, Professional or hire use,
c) Repairs attempted by anyone other than our authorized
repair agent,
d) Ingress of foreign objects, substances or accident
In the unlikely event of a fault occurring, contact should be
made with the shop this product was bought. The above
guarantee is only valid within the Europe and does not affect
your statutory rights.
