5
2. Display
MDT-10DEN3-QA3
，
MDT-20DEN3-QA3
Display (for electronic models):
Shows the set % humidity level while setting, then shows the actual (+5% accuracy) room %
humidity level.
Error Codes:
E1- Humidity sensor error--Unplug the unit and plug it back in. If error repeats, call for service.
E2- Temperature sensor error-- Unplug the unit and plug it back in. If error repeats, call for
service.
Protect Codes:
P1- Unit is defrosting-- Allow the unit to automatically defrost. The protective will clear after the
unit self defrosts.
P2- Bucket is full or bucket is not in the right position--Empty the bucket and replace in the
right position.
NOTE: When more than one errors occur, the priority of the code display order is: P2--E2--E1--P1
Humidity Set Control Pads:
The humidity level can be set within a range of 35%RH (Relative Humidity) to 80%RH
(Relative Humidity) in 5% increments. For drier air, press the
pad and set to a lower
percent value (%). For damper air, press the
pad and set to a higher percent value (%).
