19
10 Troubleshooting
In general, possible trouble is classified in three kinds. One is called Starting Failure which is caused
from an electrical defect, another is ineffective Air Conditioning caused by a defect in the refrigeration
circuit and improper application, and the other is called the Structure Damage.
D
T
(
T
1
Problem
What to check
Unit does not start
●
Make sure the dehumidifier s plug is pushed completely into the outlet.
●
Check the house fuse/circuit breaker box.
●
Dehumidifier has reached its pre-set level or bucket is full.
●
Water bucket is not in the proper position
Dehumidifier does not
dry the air as it should
●
Did not allow enough time to remove the moisture.
●
Make sure there are no curtains, blinds or furniture blocking the front or back of
the dehumidifier.
●
The humidity control may not be set low enough.
●
Check that all doors, windows and other openings are securely closed.
●
Room temperature is too low, below 5
℃
(41
℉
).
●
There is a kerosene heater or something giving off water vapor in the room.
The unit makes a loud
noise when operating
●
The air filter is clogged.
●
The unit is tilted instead of upright as it should be.
●
The floor surface is not level.
Frost appears on the
coils
●
This is normal. The dehumidifier has Auto defrost feature.
Water on floor
●
Hose to connector or hose connection may be loose.
●
Intend to use the bucket to collect water, but the back
drain plug is removed.
E1, E2, P1 or P2 appear
in the display
●
These are error codes. See the CONTROL PADS ON THE
DEHUMIDIFIER section.
