13
Find a bunch of
cables from the
command behind
Take away the black
connector cover
Connect the OEM
connector to the
supplied CAN IN/OUT
Remove the black
connector marked
with a red circle
Put the black connector
cover onto the supplied
CAN IN/OUT cable
Reconnect the supplied
cable where the black
connector was removed.
* CAN IN/OUT connection for NTG5.5
- Find a bunch of wires from the command behind the monitor as shown below
GROUND
B+
* Connect the black ground wire
of the supplied power cable to
the brown OEM wire
* Connect the red B+ wire of the
supplied power cable to the
orange/blue OEM wire
car-solutions.com
car-solutions.com
