Car-O-Liner CMI 300 Pulse Boost, User Manual

Page: 16 / 92

16
Technical data 1
1) This equipment complies with IEC 61000-3-12 provided that the short-circuit power Ssc of the grid at the interface point is greater than or equal to the stated data in the
abovementioned table. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to the stated data in the abovementioned table.
2) S This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks.
3) Equipment marked IP23S is designed for indoor and outdoor applications.
Power source CMI 300 Pulse CMI 300 Pulse Twin CMI 300 Pulse Trio
Mains voltage ±15% (50-60Hz), V 3x400 3x400 3x400
Minimum generator size, kVA 16 16 16
1) Minimum short-circuit power, MVA 3.7 3.7 3.7
Fuse, A 10/16 10/16 10/16
Mains current effective, A 8.5 8.5 8.5
Mains current max., A 15.3 15.3 15.3
Power 100%, kVA 5.8 5.8 5.8
Power max., kVA 10.6 10.6 10.6
Power open circuit, W 30 35 40
Efficiency 0.86 0.86 0.86
Power factor 0.93 0.93 0.93
Current range, A 15-300 15-300 15-300
Duty cycle 100% 20°C, A/V 250/26.5 250/26.5 250/26.5
Duty cycle max. 20°C, A/%/V 300/60/29.0 300/60/29.0 300/60/29.0
Duty cycle 100% 40°C, A/V 200/24.0 200/24.0 200/24.0
Duty cycle 60% 40°C, A/V 230/25.5 230/25.5 230/25.5
Duty cycle max. 40°C, A/%/V 300/20/29.0 300/20/29.0 300/20/29.0
Open circuit voltage, V 50-60 50-60 50-60
2)
Sphere of application S/CE S/CE S/CE
3)
Protection class IP23S IP23S IP23S
Standards IEC60974-1. IEC60974-5. IEC60974-10 Cl. A
Dimensions (HxWxL), mm 838x443x1003 1104x597x1003 1104x597x1003
Weight, kg 49 63 67
Wire feed speed, m/min 0.5-30.0 0.5-30.0 0.5-30
Torch connection EURO EURO EURO
Wire dimension, mm 0.6-1.6 0.6-1.6 0.6-1.6
Wire spool diameter, mm 300 2x300 3x200
Wire spool, kg 5-18 2x5-18 3x5
Gas pressure, max., MPA (bar) 0.6 (6.0) 0.6 (6.0) 0.6 (6.0)
FUNCTION PROCESS VALUE RANGE
Selection of trigger mode, 2-times / 4-times MIG/MAG 2/4
Gas pre-flow, sec. MIG/MAG 0-10
Soft-start, m/min MIG/MAG 0.5-24.0
Hot-start, % Synergic -99-(+)99
Hot-start-time, sec. Synergic 0-20
Slope down time, sec. Synergic 0-10
Final current, % Synergic 0-100
Final current time, sec. Synergic 0-10
Gas post-flow, sec MIG 0-20
Spot welding time, sec. MIG 0-5.0
Step welding time, sec. MIG 0.1-5.0
DUO Plus™ value MIG 1-50
Electronic choke MIG -5-(+)5