
BenchRack Car-O-Liner
Group
AB
32163, EN - rev. 5,
2018-04
39
5.
With the vehicle supported by the pillar jacks (left and right side),
gently lower the lift to allow the front bench mountings and chassis
clamps to be fitted. For correct placing of the bench mountings and
chassis clamps, see section 4.2.1 Drive on to BenchRack.
6.
Gently raise the the bench to fit the clamps to the sill flange. For
correct fitting of the bench mountings and chassis clamps, see
section 4.2.2 Setup with chassis clamps.
NOTE
! Do not tighten the bolts for the clamp plates to the bench
mounting before all 4 chassis clamps are in position.
NOTE!
Tighten the chassis clamps; first against the sill edge and then
against the bench mounting.
7.
Repeat the procedure described in step 5.
8.
Repeat the procedure described in step 6.
NOTE
! Do not tighten the bolts for the clamp plates to the bench
mounting before all 4 chassis clamps are in position.
NOTE
! Tighten the chassis clamps; first against the sill edge and then
against the bench mounting.
Summary of Contents for BenchRack 4200
