SIMPLE™ KEY USER GUIDE
14
FREQUENTLY ASKED QUESTIONS
Q:
The EZ Installer™ beeps 5 times after pushing the button to initiate the pairing process and will not pair the new key.
A:
Your vehicle allows a maximum of 5 paired keys or 6 paired remotes. If the vehicle already has 5 keys paired to it, a new key
cannot be paired. If the EZ Installer™ beeps 5 times early in the pairing process, this indicates that the maximum number of keys
have been paired. Perform both the ERASE KEY and ERASE REMOTE steps. Then, try the KEY PAIRING and REMOTE PAIRING
processes again. Gray colored valet keys should be paired before black master keys or remotes.
Q:
Can I use the same EZ Installer™ on other vehicles?
A:
No, the EZ Installer™ will be locked to the first vehicle it is used on. You may add more keys to the same vehicle again as
needed, but it will not work on different vehicles. If the EZ Installer™ sounds 3 beeps at 1 second intervals, then beeps rapidly, this
signifies that the device has already been used on another vehicle. Visit CKESimpleKey.com or your local retailer to purchase
additional key.
Q:
The EZ Installer™ sounds 3 or 4 beeps at 1 second intervals 3 times then beeps continuously.
A:
When problems occur during the pairing process, EZ Installer™ will beep an error code, followed by continuous faster beeps.
The number of error beeps correspond to specific error codes, explained below.
•
Three
distinct beeps at 1 second intervals indicate the device has already been used on another vehicle. The EZ Installer™
can only pair Simple™ Keys to one vehicle. The EZ Installer™ will be locked to the first vehicle it is used on. You may add
more keys to the same vehicle again as needed, but it will not work on different vehicles.
•
Four
distinct beeps at 1 second intervals indicate that the incorrect dial position was selected on the EZ Installer™. Carefully
read the instructions and refer to the compatibility lookup on pages 4-5.
Please contact Car Keys Express customer service at 888-598-8910 for any questions.
