SIMPLE™ KEY USER GUIDE
11
5.
Insert the
original key
and turn the ignition to the ON/RUN position. If there are no markings, turn the key
clockwise and stop just short of starting the engine.
6.
Press and release the EZ Installer™ button. You will hear a short beep.
7.
Wait 30 seconds, the EZ Installer™ will beep twice. You will then have 12 seconds to complete the next step
(step 8).
8.
Remove the key and re-insert it.
Do not turn the key
. Then, press and release the button on EZ Installer™.
a.
NOTE:
If you do not complete the steps in 12 seconds, the EZ Installer™ will beep continuously, and an
error has occurred. Unplug the device, remove the key, and begin again at Step 1. If you do not hear any
sound, you have started the pairing process. Continue below.
9.
Wait 60 seconds. When erasing is complete, the EZ Installer™ will beep 3 quick, different pitch beeps.
10. If you need to pair keys, leave the EZ Installer™ plugged into the OBD port and continue to STEP 1 (of 1)
KEY PAIRING.
TOYOTA IGNITION POSITIONS
