USER GUIDE
7
until the doors lock and unlock. This may take up to 30 seconds.
10.
Repeat step 9 for each additional remote (including any original
remotes).
11.
Turn the ignition to the ON position to exit programming mode.
OBP B
1.
Turn the ignition key to the ON position and the radio OFF.
2.
Press the RESET button on the Driver Information Center (DIC) to
the right of the dashboard instrument cluster.
3.
Press OPTIONS button on DIC until dashboard display is blank.
4.
Press and hold the RESET button for 3 seconds.
5.
Press OPTIONS button until FOB TRAINING is displayed on the
dashboard display.
6.
Press RESET button to begin programming sequence.
7.
Simultaneously press and hold Lock and Unlock buttons on the
first remote for 13 seconds. A message will appear when the
remote is programmed. Repeat this step for additional remotes up
to a maximum of 3 remotes total.
8.
Turn ignition OFF and remove keys from ignition.
OBP C
1.
Turn the ignition key ON and the radio OFF.
2.
Press and hold the DISP button on the radio for at least 5 seconds
until SETTINGS is displayed.
3.
Press the SEEK up or down arrows on the radio until FOB PROG
appears on the radio display.
4.
Press the PREV or NEXT button to enter the sub menu. The
current selection will have an asterisk next to it. BEGIN will be
displayed.
5.
Press the DISP button to start programming. When the message
PUSH FOB flashes, press and hold the LOCK and UNLOCK buttons
on your new remote at the same time for 15 seconds. A chime will
be heard to verify the transmitter is learned.
6.
Repeat step 5 for each additional transmitter up to four remotes
total. You do not need to press the DISP button again. Just press
down the LOCK and UNLOCK buttons on the next remote to be
learned.
7.
To exit Programming Mode, use the SEEK arrows to scroll until
