Version 14.06..2018
HW: LVDS
CI-VL2-PCM31
P
a
g
e
7
2.
Installation
To install the interface, first switch off the ignition and disconnect the vehicle’s battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
2.1.
Place of installation
2.1.1.
Place of installation – video interface und CAN-Bus box
The boxes shall be installed behind the vehicle`s head-unit or the glove department,
depending on equipment and space.
2.1.2.
Place of installation - daughter PCB
The interface’s daughter PCB is prepared to be installed in the head unit’s housing.
