Version 14.06..2018
HW: LVDS
CI-VL2-PCM31
P
a
g
e
10
2.4.
Connection-50pin ribbon cables -
Push upwards the white hinges of the factory ribbon cable bases to unlock the
original 50pin and 30pin ribbon cables of the factory PCB (red arrows)
Carefully pull out both original ribbon cables (yellow arrows).
Connect the daughter PCB’s 50pin ribbon cable
„ To PCB mainboard “
to the
previously become free 50pin ribbon cable base of the factory PCB. Make sure that
the connector pins are faced in the invisible direction.
After a check of its perfect position, close the ribbon cable base’s lock by pushing
downwards the white hinge, to fix the connection again.
