Version 17.02.2020
HW: LVDS(50)
CI-VL2-LR14-OPS
P
a
g
e
6
1.3.3.
Dip-switch settings – interface (8dip – black)
Some settings have to be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
See the following chapters for detailed information.
After each Dip-switch-change a power-reset of the Can-box has to be performed!
1.3.3.1.
Enabling the interface’s video inputs (dip 2-3)
Only the enabled video inputs can be accessed by switching through the interface’s video
sources. It is recommended to enable only the required inputs, so the disabled inputs will be
skipped while switching through the video interfaces’ inputs.
1.3.3.2.
Rear-view camera setting (dip 5)
If set to
OFF
, the interface switches to factory LVDS picture while the reverse gear is engaged
to display the factory rear-view camera or the factory optical park system picture.
If set to
ON
, the interface switches to its rear-view camera input while the reverse gear is
engaged.
1.3.3.3.
Touch panel version (Dip 6)
For monitors with resistive touch panels, dip6 has to be set to ON.
For monitors with capacitive touch panels, dip6 has to be set to OFF.
1.3.3.4.
Monitor specific settings (Dip 7)
Dip switch setting
ON
will support the 8inch monitor.
Dip switch setting
OFF
will support the 7inch monitor.
1.3.3.5.
PDC adjustments (dip 8)
If set to ON, the PDC car graphic will be shown on the display. If set to Off, the PDC car
graphic will disappear.
Note:
Dip 1 und 4 are out of function and have to be set to
OFF
.
Dip
Function
ON (down)
OFF (up)
1
No function
set to OFF
2
CVBS AV1-input
enabled
disabled
3
CVBS AV2-input
enabled
disabled
4
No function
set to OFF
5
Rear-view cam type
after-market
factory or none
6
Touch panel version
with resistive touch panel
with capacitive touch panel
7
Monitor size
8inch monitor
7inch monitor
8
PDC
Enabled
disabled
