Version 16.02.2017
CI-RL2-N900
P
a
g
e
5
1.3.2.
CAN-bus box
The CAN box reads the vehicle’s digital signals out of the vehicle’s CAN-bus and converts
them for the video interface.
1.3.2.1.
Dip-switch settings
Some settings must be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
See the following chapters for detailed information.
1.3.2.2.
Enabling the interface’s video inputs (dip 2-3)
Only the enabled video inputs can be accessed by switching through the interface’s video
sources. It is recommended to enable only the required inputs. So the disabled inputs will be
skipped while switching through the video interfaces inputs.
1.3.2.3.
Rear-view camera setting (dip 5)
If set to OFF, the interface switches to factory LVDS picture while the reverse gear is
engaged, to display factory rear-view camera or factory optical park system picture.
If set to ON, the interface switches to its rear-view camera input while the reverse gear is
engaged.
Dip
Function
ON (down)
OFF (up)
1
No function
set to OFF
2
Front camera-input
enabled
disabled
3
Video 2
enabled
disabled
4
No function
Set to OFF
5
Type of Rear-view
camera
after-market
factory or none
6
No function
-
Set to OFF
7
Monitor
adjustments
Try all 4 possible combinations of dip 7 and 8 to receive
the best picture (quality and size)
8
