Version 02.03.2020
HW: 25(V92)172(V20)
CI-VL2-UCON8-SM
P
a
g
e
6
1.3.3.
Dip-switch settings – interface
Some settings have to be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
After each Dip-switch-change a power-reset of the Can-box has to be performed!
See the following chapters for detailed information.
1.3.3.1.
Enabling the interface’s video inputs (dip 2-3)
Only the enabled video inputs can be accessed by switching through the interface’s video
sources. It is recommended to enable only the required inputs, because the disabled inputs
will be skipped while switching through the video interfaces inputs.
1.3.3.2.
Rear-view camera setting (dip 5)
If set to
OFF
, the interface switches to factory LVDS picture while the reverse gear is engaged
to display factory rear-view camera or factory optical park system picture.
If set to
ON
, the interface switches to its rear-view camera input while the reverse gear is
engaged.
1.3.3.3.
Monitor specific settings (dip8)
Dips 8 customizes the monitor-specific video settings.
Dip switch setting
ON
will support the 4.3inch monitor.
Dip switch setting
OFF
will support the 8inch monitor.
Dip
Function
ON (down)
OFF (up)
1
No function
set to OFF
2
CVBS AV1-input
enabled
disabled
3
CVBS AV2-input
enabled
disabled
4
No function
set to OFF
5
Rear-view cam type
after-market
factory or none
6
No function
set to OFF
7
No function
set to OFF
8
Monitor specific
adjustment
4.3inch monitor
8inch monitor
