Version 02.03.2020
HW: 25(V92)172(V20)
CI-VL2-UCON8-SM
P
a
g
e
18
3.
Video interface operation
3.1.
By infotainment buttons
To switch the video sources long press or 2X press the vehicle’s
VOICE
button at the steering
wheel or, in case of the 4.3inch monitor, the
MORE
button can be used.
A double press of the steering wheels “Voice” key switches to the next activated video input.
A long press of the4.3inch monitor’s “More” key switches to the next activated video input.
If all inputs are enabled the order is:
Factory video
video IN1
video IN2
factory video
…
Disabled inputs will be skipped. While switching from
Video IN1
to
Video IN2
the audio-
source will be switched too, assuming the sources have also been connected to the audio
cable.
Switchover by vehicle buttons isn’t possible in all vehicles. In some vehicles the white wire
of the 6pin cable has to be used
(see following chapter).