Version 03.07.2020
HW CAM(V98)/(V16)
CI-RL3-LR16-8/10
P
a
g
e
12
2.3.2.2.
INCONTROL TOUCH PRO head unit (10,2 inch monitor – RL3-LR16-10)
Connect the female 10pin connector of the 10pin Power / CAN cable to the 10pin connector
of the video interface.
Remove the female 24pin connector of the vehicle harness from the rear-side of the head-
unit and connect it to the male 24pin connector of the Power / CAN cable.
Connect the opposite female 24pin connector of the Power / CAN cable to the previously
become free male 24pin connector at the rear-side of the head unit.
Note: If, after connecting the PNP harness, no interface LED lightens up while the ignition is
turned on, refer to chapter “Analog power supply for the video interface”
