Version 08.12.2015
CI-C1-RNSE
Pa
ge
5
3.2.
Connections to head-unit
Remove the head-unit from the dash-board.
Plug female 32pin AMP-connector of C1C-RNSE into male 32pin AMP-socket of head-
unit.
Note:
If the 32pin AMP-socket of the head-unit is already occupied, the vehicle probably has
a factory rear-view camera or a factory TV-tuner. In case of a factory tuner, it must be
uninstalled: disconnect the female 32pin AMP-connector of the factory harness and
disconnect all wires from the factory TV-tuner. In case of a factory rear-view camera you
have ordered/received the wrong product, call for support.
Connect the loose red cable to +12V battery, the loose black cable to ground, the
loose yellow cable to CAN-HIGH and the loose blue cable to CAN-LOW of the vehicle.
No liability for vehicle wire colors and pin definition! Possible changes by the vehicle
manufacturer. The given information must be verified by the installer.
Pin of Quadlock Assignment
Pin 15
+12V Permanent
Pin 12
Ground
Pin 9
CAN HIGH 9
Pin 10
CAN LOW
Quadlock male of vehicle
