Version 22.10.2020
HW CAM(V100)(V12)
CI-UCON5N
P
a
g
e
14
2.7.
Analog power supply
If, after connecting the 20-Pin PNP harness, no interface LED lightens up while the ignition is
turned on, the single purple coloured wire
Manual ACC
of the 12pin interface cable has to
be connected additionately to
+12V
S-contact
terminal
86s
(e.g. glove compartment
illumination).
Connect the female 12pin connector of the 12pin interface cable to the male 12pin
connector of the video interface.
Connect the 12pin interface cable’s purple coloured wire
Manual ACC
to
S-contact
terminal 86s +12V
(e.g. glove compartment illumination).
