Version 26.02.2018
HW25 (V92)
CI-VL2-N902
P
a
g
e
11
2.5.
Connecting peripheral devices
It is possible to connect one after-market RGB navigation (or another RGB video source), two
after-market AV-sources and one after-market rear-view camera to the video-interface.
Before final installation of the peripheral devices, we recommend a test-run to detect a
incompatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer there’s always a possibility of incompatibility.
2.5.1.
After-Market RGB navigation
Connect the female 8pin connector of the RGB cable to the male 8pin connector of
the video-interface. The loose grey wires don’t have any function and have to be
isolated.
Connect the male 6pin connector of the RGB cable to the after-Market navigation.
If the aftermarket navigation NAV-FN900E will be connected, the factory touch-screen
can be used. Please add the following step:
Connect the female 8pin connector of 6pin to 12pin cable to male 8pin connector
(Ctrl) of the video-interface.
