Version 24.01.2023
HW: CAM(V100) / (V30)
CI-RL4-UCON10
P
a
g
e
10
2.3.
Connection - factory head-unit
Remove the head unit
2.3.1.
Connection – picture signal cable
Disconnect the female HSD connector (colours may vary) at the rear-side of the head unit and
connect it to the waterblue coloured male HSD connector „
TO LCD“
of the video interface.
Connect the female angled waterblue coloured HSD connector of the enclosed picture signal
cable to the waterblue coloured HSD+2 connector „
HU IN“
of the video interface.
Connect the opposite female not-angled waterblue HSD connector of the enclosed picture
signal cable to the previously become free HSD connector of the head unit
Note:
Depending on the installation conditions, the enclosed picture signal cable may also
be mounted upside down, concerning it’s HSD connectors . However, it‘s connection must
only be made at the head unit!
