Version 04.02.2019
HW:GD(V98)/(V50)
CI-RL3-MM-NP
P
a
g
e
9
2.4.
Connection – 10pin PNP cable
Connect the 10pin PNP cable’s female 10pin connector to the 10pin connector of the
video interface.
Disconnect both female 29pin connectors of the factory harness at the rear side of the
head unit and connect it to the male grey coloured 29pin connectors of the 10pin PNP
cable.
Connect the 10pin PNP cable’s opposite female grey coloured 29pin connectors both to
the head unit’s previously become free male 29pin connectors.
Note:
The GM-Lan communication doesn’t succeed in all vehicles. If, after connecting the
10pin PNP cable, no interface LED lightens up while the ignition is turned on, refer to
chapter “Analogue power supply for the video interface”.
