2
SET UP
Charge your dash cam before its first use by
plugging it into either a USB wall plug (not
included), a computer, or the provided car
charger. A red indicator light will appear when
the dash cam is charging, and charging should
take approximately 1 to 2 hours. After the dash
cam is fully charged, the red light will disap-
pear. Then, insert a Class 10 SD card into the
SD Card Slot (this dash cam supports up to
128GB Class 10 SD Cards).
Connect the Mounting Bracket to the main
camera body, then affix it to the front wind
-
shield of the car. Be sure to place it in a loca-
tion that does not obstruct the driver’s view. It
is recommended to place it near or under the
rearview mirror.
Plug in the USB cable into the camera, and
connect it to the car charger. Be sure to
run the cable around the perimeter of the
windshield so it does not obstruct the driver’s
