manualshive.com logo in svg

Captron Electronic safeCAP SC30, Operating Instructions Manual

Share
Download
Captron Electronic safeCAP SC30 Operating Instructions Manual Download Page 17

Maintenance operation

as

needed

annually Testing interval

Clean the switch surface

X

Test the safety function

X

Check cables for intactness

and firm fit

X

Check screw connections

for tightness

X

7.2

Testing the safety function of the SC30

How to test the safety of SC30 

see "Testing the safety function of the SC30",

page 15

.

7.3

Troubleshooting

Green LED (1) isn’t lighting up.

►

Check the plug on the back for tightness and

damage.

►

Check cable for damage.

►

Check the power supply.

Yellow LED (2) doesn’t light up when

actuated.

►

Switch actuated too slowly.

►

Switch actuated too fast.

►

Switch actuated with excessively thick gloves.

►

Switch surface excessively dirty.

Green LED (1) and yellow LED (2) are lit up.

Process on the machine not triggered.

■

Have the switch checked for proper connection.

safeCAP SC30

Original operating

instructions

1.1

17/25

Summary of Contents for safeCAP SC30


























Reviews:

No comments

Brands by name

Popular brands

Load more brands