H1002 / E1002R
3
SHOWER PROOF CLOCK
OVERVIEW
MAIN UNIT
FEATURES
6.
RCC with DCF
7.
With waterproof feature
8.
LCD display indoor temperature (
℃
/
℉
selectable )
9.
Indoor temperature range: -9
℃
~ +50
℃
.
10.
DST function
GETTING STARTED
POWER SUPPLY
1. Twist and lift the back cover.
2. Remove the battery compartment cover.
3. Insert 1x AA batteries matching the polarity (+and-).
TIME SET
DCF signal
This clock is designed to set itself automatically on reception of the radio signal coming from close to Frankfort in Germany. It
allows all European country within approx. 1500 kms radius around Frankfort to benefit from this radio signal. Summer and winter
time settings will be also automatic.
All is set by this radio signal which is received by the clock several times a day.
DCF signal reception
The unit starts searching for the DCF signal automatically after been start up. This operation can take several minutes to several
hours. Please do not hesitate to change of room for the first reception. The unit automatically adjusts depending on the signal
every day at 2 o'clock, 3 o'clock, 4 and 5 o'clock.
To run manual setting, press and holding the “SET” button on the back of movement, until the time is set as required.
TEMPERATURE DISPLAY
The indoor temperature will display automatically after set up.
POSITIONED METHOD
The bathroom clock can be positioned in 3 ways as desired.
D.
Pull out the table stand brackets from the rear of the clock, place on table or desk as desired.
E.
Hang on the wall by hanging hole
F.
Hang on the smooth place with suction cap
It is better to use suction cup only for short period time The clock can fall down if suction cups are used too long. The table stand or
wall mounting are more secure.
RESET
1. Press “RESET” key to return to the default settings.
PRECAUTIONS
Do not clean any part of the product with benzene, thinner or other solvent chemicals. When necessary, clean it with a soft
cloth.
Never immerse the product in water. This will damage the product.
Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity.
Do not tamper with the internal components.
