background image

-  Please follow the steps outlined in chapter 10.5 & 10.6 to clean the grinder 

  and grinder chute. 

-  Double check that the upper burr is locked into place before grinding. 
- Call Customer Service for additional guidance to remove tough clogs. 

Upper burr does not fit back into the machine.

-  Double check that the fineness knob is in the RELEASE position before 

  placing the upper burr back into the machine, as described in chapter 9.   

- Follow location of upper burr handle as shown in Fig. 8 & Fig. 9.

The machine beeps when I press the BREW button. 

Check the following:
-  Bean container lid is on, pushed down and fully engaged.
-  Removable water tank is on, pushed down and fully engaged.
- Ensure the bean container is locked into place. See chapter 7.4 to correctly 

  attach bean container. 

Can the grinder run without beans in the bean container? 

-  Yes, it is ok if the grinder runs without any beans. 

Can I have different grind amount settings for the current and the 
Auto-On mode?

-  Yes. See chapter 7.1, e.

How long does the machine keep the grinding and brewing settings? 

-  As long as the machine is plugged in. If the machine loses power you have 

to reset the time and personal settings (see chapter 7).

I want a full pot of coffee at 8:00 AM. What time should I program the
machine to start? 

-  Set the Auto-On timer 15 minutes earlier (in this case at 7:45 AM).

The grinder makes a loud noise? No coffee is processed. 

- Ground coffee is blocking the grinder or grinder outlet. Follow cleaning 

  instructions in chapter 10.5 & 10.6.

-  A stone blocks the grinder. Remove bean container and upper burr to check 

  for any stones or foreign objects. If you cannot locate and remove the stone 
  on your own, please call 1-800-767-3554.

How can I increase the strength of the coffee?

- Select 12 in the CUPS setting but only fill the water tank to the 8 cup marking.

  This will give you more ground coffee in the filter and increase the strength of
  the brew See chapter 7.2.

Grinder suddenly stopped during grinding cycle or beans are not feeding. 

- Check that bean container lid is pressed down and fully engaged.
- Press the "Ground Coffee" and "Auto" buttons at the same time to clear the
grinder of any left over coffee beans stuck in grinder.13. 

Loud buzzing noise during grinder operation and grinder gets blocked or
jammed...

- Push the brew button to stop grinding and unplug the machine.
- Follow cleaning instructions in chapter 10.5 and 10.6 to remove the ground 

  coffee from the coffee outlet and conical burrs.

16

Summary of Contents for CoffeeTEAM Pro Glass 477


















Reviews: