8.1 DRIP STOP / STOP AND SERVE
• While the coffee is brewing you can remove the carafe to pour a cup or two.
The drip stop will close automatically.
• To avoid any overflow, replace the carafe within 20 seconds.
CAUTION:
The drip stop might not close completely allowing coffee to drip
onto the platform. In this case immediately place carafe back into the machine
and let all the coffee flow into the carafe.
• After brewing is finished, check the GoldTone filter for any clogging and rinse
the filter insert to remove any coffee particles from the drip stop (Fig. 5).
8.2 GRINDING AND BREWING LATER ("AUTO")
• Coffee maker is plugged in and the time and auto-on time are set.
• Beans are in the bean container and bean container lid is on and pushed
down securely.
• Fill the water tank with the desired amount of water.
• Make sure the filter insert and GoldTone filter are in place and the GoldTone
filter is empty.
• Make sure the filter holder is closed.
• Insert the carafe with lid, into the machine.
• Push the AUTO button briefly. The clock icon will illuminate on the display.
At the preprogrammed time, the clock icon will disappear, the cup icon will
illuminate and the grinding and brewing will start.
Recommendation:
If you want your coffee ready by 7:30, set the auto-on
time to 7:15.
NOTE:
See chapter 7.1, b for
Setting the Auto-On Time
.
9. BREWING COFFEE WITHOUT THE GRINDER
You can use your CoffeeTEAM PRO like a regular drip coffee maker with pre-
ground coffee (without using the grinder).
• Remove the water container (Fig.1.12) and fill to the desired amount of cups.
Place water container back onto the machine and push down to fully engage
the base valve.
• Push the filter holder button to open and fill ground coffee into the
GoldTone filter. Close the filter holder.
• Insert the carafe with lid into the machine.
• Push the GROUND COFFEE button and the scoop icon illuminates.
• Push the BREW button. The cup icon illuminates and the brewing process
starts immediately.
9.1 BREWING PREGROUND COFFEE LATER ("AUTO")
• Coffee maker is plugged in and the time, auto-on time are set and
GROUND COFFEE is selected in the AUTO programming menu.
• Remove the water container (Fig.1.12) and fill to the desired amount of cups.
Place water container back onto the machine and push down to fully engage
the base valve.
• Push the filter holder button to open and fill ground coffee into the GoldTone
filter. Close the filter holder.
• Insert the carafe with lid into the machine.
• Once desired Auto-On time is programmed, press the AUTO button again.
The display reverts to the actual time and the clock icon will remain illuminated.
13
