background image

Instruction manual ZC622 ZC922 19

Please keep this instruction manual for future reference 

FAU LT

C AU S E

S O L U T I O N

The lights on, but the fan 

does not work

The fan blade is jammed.

Switch off the unit and contact  

Caple Service. To be repaired by qualified 

service personnel only.

The motor is damaged.

The lights and fan  

do not work

A blown fuse.

Replace the fuse.

The power cord is loose.

Plug in to the power supply again.

Serious vibration of the unit

The fan blade is damaged.

Switch off the unit and contact  

Caple Service. To be repaired by qualified 

service personnel only.

The fan motor is not fixed tightly.

Switch off the unit and contact  

Caple Service. To be repaired by qualified 

service personnel only.

The unit is not hung correctly on the 

bracket.

Take down the unit and check whether the 

bracket is in the correct location.

The extraction performance  

is not good

The filter requires cleaning.

Clean the grease filter as directed in the 

‘Care and maintenance’ section. Replace the 

charcoal filter (if in recirculation mode).

If the above table has not solved the problem please contact Caple Service by phone on 

0117 938 7420 

or by email 

[email protected]

T R O U B L E S H O OT I N G

Summary of Contents for ZC622

























Reviews: